Versa Cut 60 Plasma Cutter
Carve custom body panels and more out of steel plates with this heavy-duty Eastwood plasma cutter. The Eastwood Versa-Cut 60 is our most powerful metal-cutting solution. The adjustable 60-amp output and Trafimet CB70 torch can cut through metal ranging from 24-gauge sheet metal to 7/8-inch plates. Use it on mild steel, stainless and aluminum in your shop or at a worksite. Not only do portable plasma cutters work faster than jigsaws or snips, but they also allow for intricate curves and angles a vehicle often needs.
A pneumatic plasma cutter is a must-have tool for anyone fabricating automotive panels and pans from scratch. It’s also a great way to build toolboxes and workbenches or create metal artwork. This cutter has a 20-foot torch cable for versatility and runs on 220vAC power. Use our Versa-Cut 60 setup chart to get the amperage and PSI just right for any metal thickness. Eastwood also provides a 3-year manufacturer’s warranty and 100% customer satisfaction guarantee. Learn more about this powerhouse plasma cutter at the Eastwood Garage.
The Eastwood Versa Cut 60 Plasma Cutter Features:
- 220v AC input
- 20′ torch cable; 10′ ground cable with clamp
- Rated 60-amp output
- Uses common consumables that are available at Eastwood or most welding supply stores
- Backed by Eastwood’s no-hassle 3-year warranty
**Note: Due to the High Frequency start feature, we do not recommend using this machine on a CNC plasma table.**
Powerful Metal Cutting
You may not need to cut through super-thick metal often – but you’ll be happy you can with the Versa Cut 60. This 220v, 50 to 60Hz, 60-amp output portable plasma cutter is designed to easily cut steel, aluminum and stainless steel from 0.010- to 0.875-inch thick. A built-in pilot arc system allows for instant arc striking and ease of use when cutting rusty material and expanded metal. The internal moisture separator helps to ensure clean dry air gets to the torch to give you consistent results. It requires a 50-amp breaker and plugs into an appropriate wall outlet.
The Versa Cut 60 comes with a heavy-duty Mosfet inverter, internal moisture separator, 20-foot torch and 10-foot ground cable with adjustable air pressure regulator. These features and parts assure long life and accurate cuts. It also includes a self-starting arc which helps in areas where rust and contaminants may be an issue. The machine has a duty cycle of 60 percent for long continuous cuts. At 45 pounds, it is light enough to bring to a friend’s shop, a race track or any place metal needs to be cut.
|Power Cord Receptacle Plug:||NEMA 6-50R|
|Power Cord Length:||5′|
|Duty Cycle:||60% @ 60 Amps|
|Air Compressor Requirements:||5-7 cfm @ 60 psi|
|Torch Cable Length:||20′|
|Ground Cable Length and Gauge:||10′ long, 5 gauge wire|
|Unit Dimensions:||19.5″ Long X 14.5″ Tall X 8.5″ Wide|
|Unit weight:||45 LBS|